ZX1900
ZX series high speed robots
The ZX1900 side-entry robot is the ideal solution, especially for fast production cycles.
EN-ZX1900 – 980 KB
Injection amount:
200~450 tons
Drying cycle time in mold:
1,1(*)sec.
Robot dry cycle time:
1,5(**)sec.
(*) House picking all timer=0 and the following movements: X=1750mm; Calculated for Y=100mm.
(**) Dry cycle, all timers=0 and following movements: X=1750mm; Y=100m; Z=600mm
Basic Mechanical Abilities
| Model | Axis Movements (mm) | Operating Principle | Linear Position Repeatability (mm) | Injection Tonnage (Ton) | ||
|---|---|---|---|---|---|---|
| Vertical | Injection Molding | Traverse | ||||
| ZX1900 | 900 | 230×2 | 1900 | AC Servo Motor, Gear and Belt | 0.1 | 200~450 |
General Abilities
| Vacuum Line | Selection of Operator / Non-operator Working Direction | Inner Mold Movement J (Pass) | Central Lubrication |
| Blow Line | Euromap 12/67 Robot Interface | Sampling | Message Support in Turkish and English on the Control Panel |
| Sprue Gripper Line | Product Stacking (Stacking of Products Taken from the Mold) | Defective Product Separation | Load Capacity Adjustment |
| Product Pickup from Fixed and Moving Platens | Product Extraction from Core in the Mold | Gripper Division | Operation Record Feature |
| Conveyor Control | 50 Mold Memory | Pause during Operation | Alarm Record Feature |
| Position Gauge | USB Memory Connection | Permission to Open IMM Door during Pause | Extra Mold Safety Sensor (Optional) |
| Mode Operation Function Control | Ejector Control | C Axis Rotation Control |
Technical Draw
Minimum Infastructure Requirements
| Power Source | Power Consumption (kVA) | Maximum Power Consumption (kW) | Air Pressure (Bar) | Air Consumption (Nl/Rotation) | Net Weight (kg) | |
|---|---|---|---|---|---|---|
| Main Body | Control Cabinet | |||||
| Three-phase AC 380V ± %10 (50/60Hz) | 3.2 | 1.9(*3) | 6~8 (*4) | 2.6 | 240 | 1.1 |
(*3) The value was calculated considering an efficiency of approximately 60% of power consumption. (*4) Dry compressed air without oil and moisture is required.
Outer Dimensions
| Description | mm | |
|---|---|---|
| A | Height | 1620 |
| B | Width | 2020 |
| C | Traverse Movement | 1500 |
| D | Distance to Stretch Axis Deviation | 270 |
| E | Distance to Axis Deviation | 250 |
| F | Vertical Movement | 800 |
| G | Vertical Waiting | 200 |
| H | Mounting Position of Gripper Below Mold | 240 |
| I | Minimum Mold Waiting Position | 225 |
| J | Maximum Mold Movement | 440 |
| I+J | Maximum Mold Access | 665 |
| K | Total Length of Mold Axis | 590 |
Twickenham Office
- +44 07480 658032
- info@moritech.co.uk
- First Floor 6 York Street Twickenham / England
Düsseldorf Office
- +49 176 72146096
- info@moritechrobot.de
- Grafenberger Allee 293, 40237 Düsseldorf / Germany
İstanbul Office
- +90 (216) 304 10 45
- info@moritech.com.tr
- Tepeören Mh. İTOSB 4. Cd. No:29 34959 Tuzla / İstanbul
Ankara Office
- +90 (216) 304 10 45
- info@moritech.com.tr
- Malıköy Başkent OSB, 20.CAD NO:8, 06909 Sincan / Ankara